Hallo zusammen,
ich habe noch ein Problem mit meinem Linux-Server. Ich habe dort eine Fritz ISDN-PCI-Karte eingebaut. Unter Tobit habe ich diese dann auch als Port eingerichtet. Der Fax-Versand über die ISDN-Karte funktioniert auch.
Jetzt würde ich auch noch gerne den Fax-Empfang darüber realisieren. Dann könnte ich unser "echtes" Fax (Durchwahl 19) abbauen. Die ISDN Karte hat die Durchwahl 29 (kompl. Nummer wäre z.B.: 0234-12345 - 29)
Mit meiner akt. Einstellung klappt es nicht ... wo müßte ich was unter Linux, DvISE Administration, TIC-Clients ändern, damit ich auch Faxe empfangen kann.
Im DvISE Administrations-Programm habe ich folgendes eingerichtet:
Konfiguration -> Ports -> Port001 (AVM Fritz! - Port 001)
Die Eigentschaften von diesem Port sehen wie folgt aus:
Allgemein:
-------------
Beschreibung = AVM Fritz! - Port 001
Betriebsmodus = senden und empfangen (TX/RX)
TLDSubType= <kein Eintrag>
Deaktivierung unterbinden= nicht gewählt
Faxkennung= +49 234 12345 19 (Rufnummer unseres "echten Faxes")
Vorwahl für Amtsholung = 0
Überprüfung der CSID = nicht ausgewählt
Dienste:
-----------
Ausgewählt sind:
FaxG3
FaxPlus
FaxRundsendungen
Module für synthetische Sprache laden
ISDN:
-------
Controller Nummer=1
Verteilmethode=MSN
Ausgangs MSN = 29
Voice=A-Law
Akzeptierte Eingangs-MSN=29
Monitor Informationen=Normal
Scipt Autostart = nie
Datenverbindungen akzeptiere= ausgewählt
DDI:
------
Präfix=<kein Eintrag>
Länge=3
Offset=-1
Bereiche= 0 0
Ausgehende=<kein Eintrag>
Ruf annehmen wen DDI-Länge erreicht= nicht ausgewählt>
Erweitert:
-------------
Verteilpfädix=<kein Eintrag>
Verteilen an= (ohne)
Inhalt meiner TLD.ini:
[COMMON];Transport Layer Driver Initialization File for CAPI compatible boards.
;Refer manual for details.
Name = AVM Fritz!
; Default is none (left blank)
; Specifies the name of the ISDN-BoardCAPIVersion = 2
; Default is auto detect
; Valid are values 0 to 2
; 0 = Unknown
; 1 = CAPI 1.1 Interface
; 2 = CAPI 2.0 InterfaceController = 1
; Default is 0 or 1 (see below)
; Specifies the number of the ISDN-Board which is to be used.
; For CAPI Version 1.1 the Controller starts with value 0.
; For CAPI Version 2.0 the Controller starts with value 1.Routing = 2
; Default is 0
; Specifies the method of inbound routing.
; 0 is for no routing by TLD (CSID)
; 1 is for DDI routing
; 2 is for MSN routingDDIPrefix =
; Default is none (left blank)
; Takes only effect if Routing = 1
; See documentation for details.DDILength = 3
; Default is 3
; Valid is 1-5
; Takes only effect if Routing = 1
; See documentation for details.DDILenOnly = FALSE
; Default is False
; Valid is True or False
; Takes only Effect if Routing = 1
; Defines if the TLD should stop receiving DDI Informations if the
; expected DDI Substring has been received. If DDILenOnly is set to True
; the TLD connects more quick.DDIOffset = -1
; Default is -1
; Valid is 1-10
; Takes only Effect if Routing = 1
; -1 : DDI will be taken from the end of the received DDI String
; 0-10 : DDI will be taken from the stated position within the DDI StringDDIRange = 0 - 0
; Default is none (left blank)
; Takes only Effect if Routing = 1
; Specifies the DDI range the TLD reacts on.DDIOut =
; Default is none (left blank)
; Takes only Effect if Routing = 1
; Only necessary for some special PBXTxMSN = 29
; Default is 0
; Only necessary for some special PBX.RxMSN = 29
; Default is none (left blank)
; Specifies the Multi Subscriper Numbers the TLD.NLM reacts on.
; Multiple MSN's can be specified, seperated by a comma
; See documentation for details.DebugMode = 3
; Default is 3
; Specifies the depth of technical information recorded.
; Valid is 0 - 5
; 0 is for none
; 1 is for important messages only
; 5 is for any capi messageIsULaw = FALSE
; Default is False (Use A-Law)
; Specifies the local ISDN Voice coding format
; Valid is True or False
; In Europe A-Law is used, in america æ-Law.AnswerDataCalls = TRUE
; Default is True
; Valid is True or False
; Specifies if datacalls (FaxPlus) should be answered by TLD.
; This parameter has to be set to FALSE if you want to run e. g. a MPR
; and the TLD on the same ISDN Controller.;===========================================================================
;TimeOut = 60
; Default is 60
; Specifies the time (in seconds) before timeout message appears.;ISDN_Service_FaxG3 = 1
; Default is 1
; Specifies the service which is used for outgoing fax (Group 3)
; 0 is for a/b services
; 1 is for analog phone;DynamicCSID = True
; Default is True
; Valid is True or False
; Takes only Effect if Routing = 1
; Defines if a received DDI should be mirrored within the CSID.;WaitForDisconnect = False
; Default is False
; Valid is True or False
; Defines if the TLD should not force disconnection at the end of fax.
; This parameter is necessary for Dr. Neuhaus 3009 Hybrid boards.;HeaderLineFeed = 0
; Default is 0
; Valid is 0-37
; Specifies the number of pixel lines left blank before sending fax
; image. To avoid overlay with David headline.;DefaultFaxPlus = False
; Default is False
; Valid is True or False
; Defines if the TLD should try to establish a FaxPlus connection first.
; True is for try FaxPlus before G3 call
; False is for no FaxPlus;HandleUnloadEvent = True
; Default is True
; Valid is True or False
; Specifies if the TLD should ask for confirmation if the TLD is to be
; unloaded by using the UNLOAD command on the Server Console.
; True is for asking for confirmation
; False is for unloading without confirmation;MaxTimeActive = 600
; Default is 600
; Specifies the maximum time for a voice connection (in seconds).;MaxPageSize = 5.242.880
; Defines the maximum permissable size of a fax page. If this value is
; exeeded reception will be aborted.;Optimized = 1
; Default is 1
; Valid are values 0 to 2
; If Optimized is set to 1, David will create A-Law copies of the played
; WAV files, which will be used in future. The advantage is a better
; system perfomance.;ProtocolFromEntry = False
; Default is False
; Valid is True or False
; If ProtocolFromEntry is set to True, the CLI instead of the CSID will
; be placed within the From field of the receive log;BeepOnRx = False
; Default is False
; Valid is True or False
; Specifies if the server should beep on an incoming call.;FaxTxScript = False
; Default is False
; Valid is True or False
; Specifies if the server will process a fax job by starting the script.;Script=\\SERVERNAME\DAVID\TLD\COMMON\TLD.DCC
; Default is \\SERVERNAME\DAVID\TLD\COMMON\TLD.DCC
; Specifies the script file that will be used by the TLD.;BusyCharge =
; Defines a charge unit that will be charged when the distant station is
; busy
; Example: BusyCharge = 12DisableFaxPolling = TRUE
; Defines whether or not fax polling calls are to be rejected.
; If DisableFaxPolling = TRUE is set, inbound fax polling calls will be immediately
; rejected. With some ISDN boards this setting results in faster acceptance of
; inbound faxes.IHSAutoConfNumber =
IHSNUMBER =
IHSHOSTMODEMSN = FALSE
IHSTXNUMBER =
IHSPASSWORD =
IHSINTERVAL = 5
IHSFROMTO = 00:00 - 00:00
IHSTXNOSASU = 0
IHSNOTICETYPE = 0
IHSTXNOWAIT = FALSE
IHSDOREPLICATION = FALSE
IHSREPINTERVALL = 0
IHSREPARCHIVE = \
TLD_BINARY_PATH=tld/code/capi/tld
TIMER = 0
IHS:
-----
Pollingnummer=<kein Eintrag>
Sendenummer=<kein Eintrag>
Passwort=<kein Eintrag>
DvISE Host Mode= MSN
Scan Interval = 5
Aktiver Zeitraum=00:00 - 00:00
Verbinden an= jedem Wochentag
Rückmeldung bei Versand=Immer
Ausgehende sofort= nicht ausgewählt
Archive Replizierung erlauben= nicht aktiviert
Sollten sonst noch irgendwelche Konfigurations-Dateien benötigt werden, bitte kurz Bescheid geben ... ich poste sie dann sofort.
mfg.
Rainer