das ist die TLD.ini
[COMMON]
;Transport Layer Driver Initialization File for CAPI
compatible boards.
;Refer manual for details.
;AddPrefix= True;
; Defines if the TLD
should add the national or international prefix number
; to the sender ID of
incoming voice calls. Set AddPrefix to True if your PBX
; does not provide
David with these prefix numbers. Use the NationalPrefix and
; InternationalPrefix
parameters to specify the numbers to be added (see below).
;NationalPrefix=00;
; This setting only
takes effect if AddPrefix is set to True (see above).
; Specifies the
prefix that is to be added in front of the Sender ID of
; incoming national
voice calls.
;InternationalPrefix=000;
; This setting only
takes effect if AddPrefix is set to True (see above).
; Specifies the
prefix that is to be added in front of the Sender ID of
; incoming
international voice calls.
Name = LANCOM Systems GmbH
; Default is none
(left blank)
; Specifies the name
of the ISDN-Board
;CAPIVersion = 0
; Default is auto
detect
; Valid are values 0
to 2
; 0 = Unknown
; 1 = CAPI 1.1
Interface
; 2 = CAPI 2.0
Interface
Controller = 1
; Default is 0 or 1
(see below)
; Specifies the
number of the ISDN-Board which is to be used.
; For CAPI Version
1.1 the Controller starts with value 0.
; For CAPI Version
2.0 the Controller starts with value 1.
Routing = 2
; Default is 0
; Specifies the
method of inbound routing.
; 0 is for no routing
by TLD (CSID)
; 1 is for DDI
routing
; 2 is for MSN
routing
;DDIPrefix =
; Default is none
(left blank)
; Takes only effect
if Routing = 1
; See documentation
for details.
DDILength =
; Default is 3
; Valid is 1-5
; Takes only effect
if Routing = 1
; See documentation
for details.
;DDILenOnly = False
; Default is False
; Valid is True or
False
; Takes only Effect
if Routing = 1
; Defines if the TLD
should stop receiving DDI Informations if the
; expected DDI
Substring has been received. If DDILenOnly is set to True
; the TLD connects
more quick.
;DDIOffset = -1
; Default is -1
; Valid is 1-10
; Takes only Effect
if Routing = 1
; -1 : DDI will be taken from the end of the
received DDI String
; 0-10 : DDI will be
taken from the stated position within the DDI String
DDIRange =
; Default is none
(left blank)
; Takes only Effect
if Routing = 1
; Specifies the DDI
range the TLD reacts on.
;DDIOut =
; Default is none
(left blank)
; Takes only Effect
if Routing = 1
; Only necessary for
some special PBX
;TxMSN = 0
; Default is 0
; Only necessary for
some special PBX.
RxMSN =
; Default is none
(left blank)
; Specifies the Multi
Subscriper Numbers the TLD.NLM reacts on.
; Multiple MSN's can
be specified, seperated by a comma
; See documentation
for details.
;DebugMode = 3
; Default is 3
; Specifies the depth
of technical information recorded.
; Valid is 0 - 5
; 0 is for none
; 1 is for important
messages only
; 5 is for any capi
message
;IsULaw = False
; Default is False
(Use A-Law)
; Specifies the local
ISDN Voice coding format
; Valid is True or
False
; In Europe A-Law is
used, in america æ-Law.
;AnswerDataCalls = True
; Default is True
; Valid is True or
False
; Specifies if
datacalls (FaxPlus) should be answered by TLD.
; This parameter has
to be set to FALSE if you want to run e. g. a MPR
; and the TLD on the
same ISDN Controller.
;===========================================================================
;TimeOut = 60
; Default is 60
; Specifies the time
(in seconds) before timeout message appears.
;ISDN_Service_FaxG3 = 1
; Default is 1
; Specifies the
service which is used for outgoing fax (Group 3)
; 0 is for a/b
services
; 1 is for analog
phone
;DynamicCSID = True
; Default is True
; Valid is True or
False
; Takes only Effect
if Routing = 1
; Defines if a
received DDI should be mirrored within the CSID.
;WaitForDisconnect = False
; Default is False
; Valid is True or
False
; Defines if the TLD
should not force disconnection at the end of fax.
; This parameter is
necessary for Dr. Neuhaus 3009 Hybrid boards.
;HeaderLineFeed = 0
; Default is 0
; Valid is 0-37
; Specifies the
number of pixel lines left blank before sending fax
; image. To avoid
overlay with David headline.
;DefaultFaxPlus = False
; Default is False
; Valid is True or
False
; Defines if the TLD
should try to establish a FaxPlus connection first.
; True is for try
FaxPlus before G3 call
; False is for no
FaxPlus
;HandleUnloadEvent = True
; Default is True
; Valid is True or
False
; Specifies if the
TLD should ask for confirmation if the TLD is to be
; unloaded by using
the UNLOAD command on the Server Console.
; True is for asking
for confirmation
; False is for
unloading without confirmation
;MaxTimeActive = 600
; Default is 600
; Specifies the
maximum time for a voice connection (in seconds).
;MaxPageSize = 5.242.880
; Defines the maximum
permissable size of a fax page. If this value is
; exeeded reception
will be aborted.
;Optimized = 1
; Default is 1
; Valid are values 0
to 2
; If Optimized is set
to 1, David will create A-Law copies of the played
; WAV files, which
will be used in future. The advantage is a better
; system perfomance.
;ProtocolFromEntry = False
; Default is False
; Valid is True or
False
; If
ProtocolFromEntry is set to True, the CLI instead of the CSID will
; be placed within
the From field of the receive log
;BeepOnRx = False
; Default is False
; Valid is True or
False
; Specifies if the
server should beep on an incoming call.
;FaxTxScript = False
; Default is False
; Valid is True or
False
; Specifies if the
server will process a fax job by starting the script.
;Script=\\SERVERNAME\DAVID\TLD\COMMON\TLD.DCC
; Default is
\\SERVERNAME\DAVID\TLD\COMMON\TLD.DCC
; Specifies the
script file that will be used by the TLD.
;BusyCharge =
; Defines a charge
unit that will be charged when the distant station is
; busy
; Example: BusyCharge
= 12
STATICLINESMSSC = 0193010
; Number for outgoing
SMS
STATICLINESMSRECSC = 01930100
; Number for incoming
SMS
IHSAutoConfNumber =
IHSNUMBER =
IHSHOSTMODEMSN =
IHSTXNUMBER =
IHSPASSWORD =
IHSINTERVAL =
IHSFROMTO =
IHSTXNOSASU =
IHSNOTICETYPE =
IHSTXNOWAIT =
IHSDOREPLICATION =
IHSREPINTERVALL =
IHSREPARCHIVE =